Reproduction brake caliper rebuild kit with a stainless steel piston for many of the 70s Honda CBs from the 350-550. This is a great kit if your piston is pitted and needs to be replaced. Brake effectively and ride safe with a new piston! Kit Includes: Stainless Steel Piston: 45107-323-020 - Diameter 38. 14mm / Height 34mm Piston Seal: 45108-300-003 Bleeder Valve: 45224-579-013 Installation Tips: Make sure to thoroughly clean the channel in the caliper that holds the seal, if there is any built up grease or dirt it will not allow the seal to sit properly which will affect the pistons ability to engage and retract. The side of the piston with the 2mm outer lip, faces the brake pad. Some pads come with a plastic ring that goes between the pad and the piston, it helps the prevent brake squealing. Use brake grease between the piston and the pad but do not allow any grease or brake fluid to come in contact with brake pads. Fits Honda: CB350F - 1972-1974 CB350G - 1973 CB360 - 1974 CB360G - 1974 CB360T - 1975-1976 CB400F Super Sport - 1975-1977 CB450 - 1972-1974 CB500T - 1975-1976 CB500K - 1971-1973 CB550F Super Sport- 1975-1977 CB550K - 1974-1978 Features: Check Fitment Below Stainless Steel Piston: 45107-323-020 - Diameter 38. 14mm / Height 34mm Piston Seal: 45108-300-003 Bleeder Valve: 45224-579-013.
