Description:

This is exactly what you want to quiet down your high flow lift pump because a draw straw will starve your pump! Use one for your Airdog or FASS for Cummins, Duramax or Powerstroke. Note: You can also plug 1 port if you would like to run this a standard sump with no return. (Plug is not included). NO suction tube. NO need to drop the fuel tank to install. This sump will feed the biggest performance pumps for all your power needs! Will solve 1/4 tank low issues, issues with your factory draw straw picking up fuel or if you just want the added fuel flow. Design will work on any flat surface, plastic or metal, gas or diesel tanks. Requires 3" hole saw. Detailed installation instructions are provided. Easy installation. Use a 3" holes saw to cut the hole where you want to install sump. Pltop plate through hole, then thread bolts through housing and into the top plate. Using a 7/32" Allen key tighten bolts until you have tight seal, approximately 10 ft lbs. Only sump out there that features an interchangeable barb design. Both 1/2" and 5/8" barbs are included. This is the only sump ready to go out of the box to run either an AirDog pump with the standard 1/2" hose ID or a higher flow FASS pump with a larger 5/8" hose ID. New 3-Bolt design equally distributes clamping force around the O-ring for reduced slippage and leaks that occurs with 1-Bolt designs while still being easier to install than old style sumps. You can also use a -10 or -8 AN fitting x 1/2" NPT. Features: NewDual-ports allow for integrated return line install or double fuel feeds for increased fuel flow. Compatible with any Airdog, FASS, etc fuel pump right out of the box. Four brass fittings: Two (2) 1/2" NPT x 1/2" hose ID and Two (2) 1/2" NPT x 5/8" hose ID. Run which ever works for your install. Top plate and housing CNC machined from billet high-strength 6061 aircraft grade Aluminum; Black Anodized Finish. Pre-assembled for easy 3-bolt installation, just cut the 3" hole and install. Instructions included. Made in U. S. A.