Description:

Set of two dual output high performance Magna coils with wire. These will work with stock point ignitions, aftermarket electronic ignitions and factory electronic ignitions. The Honda SOHC fours came stock with coils that have non removable wires, so this coil works great as a modern replacement. This coil will mount to the stock brackets on many SOHC Honda fours, but it will not mount to the stock bracket on the CB350F/400F due to the 13mm O.D metal mounts.. Kit Contains: Magna High Output Coils - Quantity 2 - Silicon Jacketed Spark Plug Wire - Quantity 8 ft.. Features & Benefits: No exposed lamination's to rust and degrade performance. High voltage and primary terminals machined from brass. Ultrasonically welded and sealed against moisture. Compact size fits easily under stock covers. High impact thermoplastic housing. Over 30,000 volts per output. Accepts 7 to 8.5mm wires.. NOTE: When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system, this will cause the coils to overheat and burn out. Before selecting a coil, check the coil primary resistance requirements as specified by the manufacturer of the ignition being used. Wires can be mounted on either terminal (no polarity + or - ).. NOTE:On the GL1000 the 2 output towers should point down and you may have to cut a small amount from the air filter intake for clearance. This is a minor modification and it's worth it for the high performance coils! If using this coil with a Dyna Ignition, the ballast resistor must be bypassed. Check fitment and additional specifications below.